Operation; Command Panel - Orved evox 25 Bedienungs- Und Wartungsanleitung

3) Fill the container with the product to be vacuumed to max ¾ of usable volume, in case of liquid products.
4) Place the container inside or outside the vacuum chamber, according to the size. If outside, suction device is necessary.

7. OPERATION

7.1 COMMAND PANEL
A-D: Keys
1-4: LED
– VAC.
A
Vacuum cycle in bags selections according to "storage" and "cooking" functions: at the power, the machine is set
on "storage cycle". Pressing VAC key once, the "cooking cycle", is activated. It is identified by LED
VAC key once more, the machine comes back to "storage cycle", identified by LED
Other functions of VAC key:
• Keeping it pressed for 5 seconds, the pump dehumidification cycle is activated. All LED flash.
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H
D
4
Vacuum selection key. Select "storage" or "cooking" vacuum cycle (pay attention to § 5.3.1).
C b
3 2
1
LED 1 ON
(FACTORy SETTING):
Vacuum cycle in bags: "storage" function.
LED +
1 2
Vacuum cycle in bags: "cooking" function.
PREPARATION
A
1
1 and 2 on. Pressing
on.
ON:
25