CLEANING
Switch off the device before any cleaning procedure and unplug the power cable from the socket.
DEVICE CLEANING
Use only a damp cloth with antibacterial soap (non-abrasive and with no solvents of any sort).
COLLECTION CANISTER AND CONNECTING TUBING
• Detach the tube (16) (NOT SUPPLIED WITH THE DEVICE), the manual vacuum flow control (15) and the tubing (14)
from the canister (9). Disconnect the tubing (6/8) from both the canister and the filter (7). Remove the canister from its
holder, keeping it upright, and empty it (in the WC at home, in the biological waste container in the hospital) and clean
it, disassembling it as shown below:
STERILISABLE CANISTER
10
11
1. Remove the safety device (.10) from the canister lid (.11)
11
2. Remove the float (.10a) from the safety device (.10)
10a
10
3. Remove the silicone gasket (11a) from the canister lid (.11)
11
11a
SINGLE PATIENT CANISTER
10
13
11
11
10a
10
11
11a