Close And Broad Sewing With Three Threads; Sewing Freehanded; Adjusting The Sewing Foot - Silvercrest KH 4300 Bedienungsanleitung

Close and broad sewing with
three threads
When sewing with this machine you can adjust from
four to three threads.
Remove either the left or the right needle (see section
"Exchanging needles") and the appropriate thread.
The machine is now ready for sewing with three
threads.
With exclusive use of the right needle, the stitching
length amounts to 4 mm (0.16").
With exclusive use of the left needle, the stitching
length amounts to 6 mm (0.24").

Sewing freehanded

Freehand operation is excellently suited for the
sewing of trouser legs, sleeves and cuffs etc.
Remove the arm support 9, as shown in the illustra-
tion, to change from flatbed to free arm operation.

Adjusting the sewing foot

The special sewing foot o is adjusted to the posi-
tion N on the countersunk screw at the front of the
sewing foot o for normal sewing operations.
Should you wish to sew a hemstitch, simply loosen
the large screw lightly and slide the small pin, which
protudes from the foot to the left, all the way in.
Now the letter R stands on the screw.
- 60 -