Declaration Of Conformity - MIRKA DEROS SP 550CV Bedienungsanleitung

Declaration of conformity

KWH Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the products Mirka® DEROS SP 125 mm (5") 7,500 rpm Electrical Random
Orbital Sander (see "Technical data" table for particular model) to which this declaration relates are in conformity
with the following standard or other normative document: EN 60745, EN 55014, EN 61000 in accordance with the
regulations 2006/42/EC, 2004/108/EC, 2011/65/EU
Jeppo 26.01.2015
Place and date of issue
Operator instructions include:
Exploded view, Parts list, Declaration of
conformity, Important, Warning, Caution,
Additional safety warnings, Technical data
table, Noise and vibration information,
Proper use of tool, Work stations, How to get
started, Operating instructions, Maintenance,
Replacing the backing pad, Replacing the
brake seal, Further service, Troubleshooting
guide, Disposal information
We reserve the right to make changes to this manual without prior notice
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool Keep these
instructions in a safe and accessible location
Required personal safety equipment
Read
operator's manual safety glasses
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents; Government Printing Office; Washington DC 20402
• State and local regulations
Company
Manufacturer / Supplier
KWH Mirka Ltd
66850 Jeppo, Finland
Tel +358 20 760 2111
Fax +358 20 760 2290
www mirka com
Wear
ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Mirka® DEROS SP 550CV (230 V) & 550X CV (110 V) • 125 mm (5")
Wear
face mask
en
Wear
43