Declaration Of Conformity - MIRKA PROS Bedienungsanleitung

Declaration of conformity

KWH Mirka Ltd, FI-66850 Jeppo, Finland
declare on our sole responsibility that the products Mirka® PROS 150 mm (6") & 125 mm (5") Pneumatic Random
Orbital Sander (see "Technical data" table for particular model) to which this declaration relates are in conformity
with the following standard(s) or other normative document(s): EN ISO 15744:2008 Following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive 2006/42/EC
Jeppo 07.07.2014
Place and date of issue
Operating instructions include:
Exploded view, Parts list, Declaration of
conformity, Important, Required personal
safety equipment, Please read and comply
with, Warning, Caution, Additional safety
warnings, Technical data, Proper use of
tool, Work stations, Operating instructions,
Maintenance, Replacing the backing pad,
Replacing the brake seal, Replacing the
muffler kit, Further service, Troubleshooting
guide, Reducing vibrations when sanding
with pad saver or interface
We reserve the right to make changes to this manual without prior notice
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool Keep these
instructions in a safe, accessible location
Required personal safety equipment
Read
operator's manual safety glasses
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents, Government Printing Office, Washington DC 20402
• Safety Code for Portable Air Tools, ANSI B186.1 available from:
American National Standards Institute, Inc , 1430 Broadway, New York, New York 10018
• State and local regulations
Company
Manufacturer / Supplier
KWH Mirka Ltd
FI-66850 Jeppo, Finland
Tel +358 20 760 2111
Fax +358 20 760 2290
www mirka com
Wear
ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Wear
face mask
Mirka® PROS • 150 mm (6") • 125 mm (5")
en
Wear
55