Declaration of compliance
The manufacturer declares that the appliances of their production are compliant with the above
mentioned EEC directives and requires that installation be done observing the norms in force,
particularly regarding the system for letting out fumes and air exchange.
DESCRIPTION OF APPLIANCES
Gas Fryer
A sturdy structure in steel placed on four feet, which make it possible to regulate the height in the
version with cabinet. The external coating is in Chrome-Nickel 18-10 stainless steel.
Each vat is provided with a thermostatic safety gas valve, which enables the regulation of the
temperature in a range from 140° C to 300° inclusive; safety is ensured by means of a thermo-
couple, which is kept active by the flame of the pilot burner.
The vat is made entirely of stainless steel.
It is heated by means of a stainless steel tubular burner, suitable for proper functioning at the high
temperatures to which it is exposed.
Electric Fryer
A sturdy structure in steel placed on four feet, which make it possible to regulate the height in the
version with cabinet. The external coating is in Chrome-Nickel 18-10 stainless steel.
It is provided with a thermostat which makes it possible to regulate the temperature in a range from
90° C to 300° C inclusive, safety is ensured by a manually operated safety thermostat.
The vat is entirely of stainless steel.
It is heated by an electric immersion heater, which is immersed in the oil.
Electronically Controlled Fryer
The electronic series comes in a gas version and an electric version; it differs from the analogical
series only for its temperature regulator, which is an electronic card in place of a thermostat.
PROVISIONS FOR INSTALLATION
Place
It is advisable to install the appliance in a well- ventilated room or under an extractor hood.
L'apparecchiatura non si può installare singolarmente. Qualora l'apparecchiatura venisse installata
in prossimità di una parete di materiale infiammabile, si devono predisporre delle protezioni (es.
fogli di materiale refrattario) che assicurino una temperatura delle pareti nei limiti di sicurezza
previsti. L'apparecchiatura a gas deve essere sempre installata a ridosso di altre apparecchiature o al
muro e non deve essere mai posizionata come elemento alle estremità. Non installare
Pag. 39/77