LCD unit functions
Warning
Stop the motorcycle before using the instrument
panel controls. Never operate the instrument panel
controls while riding.
1) Water temperature warning light.
This function indicates engine water temperature.
E
Important
Never use the vehicle when the temperature reaches
max. value or the engine might damage.
2) Clock.
3) Tachometer.
This function indicates vehicle speed.
14
4) Auxiliary display.
This function indicates odometer, trip meter, average
speed, instant fuel consumption, average fuel
consumption, fuel used, range and residual fuel
quantity, in this sequence.
5) EOBD light
(amber).
When on, this light is used by the control unit to signal
the presence of errors and sometimes the consequent
engine disabling.
It is also used as a reference light during the
immobilizer overriding procedure with the throttle
twistgrip.
If there are no errors, the light should turn on when
the ignition switch is turned ON and should go off
after a few seconds (usually 1.8 - 2 seconds).