Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GETTING TO KNOW YOUR CLEANER
A.
Main Cleaner
B.
Hose
C*
Hose handle looped* (For Acubed
Silent Extra model 62 dba)
C** Hose handle curved**
(For Acubed Silent model 69 dba)
D.
Suction Regulator*
E.
Telescopic Tube Button**
F.
Carry Handle
G.
Bag Check Indicator LED
H.
On/Off Pedal
I.
Cord Reel Pedal
J.
LED Display Screen*
K.
Variable Power Control Button*
K1. Variable Power Control Slider*
L.
Tool Bracket*
M.
Floor type selector*
N.
Carpet and Floor Nozzle (GP)**
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
Connect the hose to the cleaner main body, ensuring it locks into position. [1]
1.
To release the hose: rotate the connector counterclockwise and pull it. [2]
2.
Connect the hose handle to the end of the fixed tube upper end and store the accessories
on the tube. [3B]
Connect the tube lower end to carpet and floor nozzle. [3A]
3.
USING YOUR CLEANER
1.
Extract power cord and plug it into the power supply. Do not pull the cord beyond the red
marker. [5]
2.
Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster and
raise or lower the tube to the most comfortable cleaning position. [4]
3.
Select Carpet or Floor Nozzle for ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [6]
4.
5.
Adjust the power level by pressing the variable power control button** or by pushing the
variable power control slider**. [7,8]
6.
Adjust the suction regulator* to the desired level. [9]
7.
Switch off at the end of use by pressing the on/off Pedal. Unplug and extract power cord
*Certain Models Only ** Certain models only, nozzles may vary according to model
N1. Carpet Nozzle (CA)**
N2. Hard Floor Nozzle (HF)**
O.
Exhausted sponge
P.
Exhausted Filter
Q.
Bag Door Release Latch
R.
Bag Door
S.
Pre-motor Filter
T.
Bag holder**
U.
Bag**
V.
Accessory Set*
V1. Crevice Tool*
V2. Furniture Nozzle*
V3. Dusting Brush*
W.
Pet Hair Remover Mini Turbo Nozzle*
X.
Allergy Remover Mini Turbo Nozzle*
Y.
Parquet Nozzle*
Z.
Easy Parquet Nozzle
again to wind the power cord back into the cleaner.
Parking and Storage - The tube can be parked for temporary storage while in use, or in the
8.
storage position when not in use. [10]
ACCESSORIES
To obtain the best performance and efficiency it is recommended that the correct nozzles are
used for the main cleaning operations. These nozzles are indicated in the diagrams by the
letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended for
occasional use only.
I
All accessories can be fitted to the end of the handle or the end of the telescopic tube.
Accessory Set* – Combines several functions in one, with maximum flexibility by the rotating
body. Reach into awkward areas by rotating the body. The 3 in 1 tool can be stored neatly
underneath the hose handle.
Crevice Tool* – For corners and hard to reach areas. [V1]
Furniture Nozzle* – For soft furniture and fabrics. [V2]
Dusting Brush* – For bookshelves, frames, keyboards and other delicate areas. To extend
the brushes push the button on the body of the tool. [V3]
Parquet Nozzle* – For parquet floors and other delicate floors. [Y]
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs
removal. [W]
Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas, particularly suitable for allergen
removal. [X]
IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and carpet
pile deeper than 15mm. Do not keep the nozzle stationary while brush is rotating.
CLEANER MAINTENANCE
Replacing the Dust Bag
If the bag check indicator is red please check and, if necessary, replace the bag.
1. Lift the bag door release latch to open the bag door, pull the bag holder and pull the pull the
bag collar to remove the bag. [11,12]
2. Apply the peel and seal sticker, located on the bag collar, to the bag inlet. The full dust bag
should be disposed of correctly and carefully. [13,14]
3. Fold a new bag as shown on the bag and fit by inserting the collar into the bag holder.
4. Refit the bag holder and close the bag door.
2
GB
Werbung
Inhaltsverzeichnis
