Sony UP-980CE Gebrauchsanweisung Seite 87

AUTO PRINT
AU TO PR I N T
ON / OF F
Selects whether the printer starts printing automatically in the multi picture mode.
ON: When the determined number of images have been captured, the printer starts
printing automatically without the COPY button being pressed.
OFF: You have to press the COPY to start printing in the multi picture mode.
AUTO SCAN
AU TO SCAN
ON / OF F
Selects the auto scan mode.
ON: Selects the auto scan mode. The printer adjusts the items related to printout
size in accordance with the input signal.
OFF: When the AUTO SCAN mode is switched from ON to OFF, settings of
items automatically adjusted in accordance with the input signal when AUTO
SCAN was set to ON are retained. OFF is recommended when the signal that may
not be correctly synchronized, such as the signal from VTR, is input.
SCAN INPUT
SCAN I NPU T
< >
E X EC
When the EXEC button in this sub menu is pressed, the printer scans for the signal
currently input and resets the following items to the factory settings for the scanned
signal.
When you change the input signal, be sure to press the EXEC button in this sub
menu.
Items reset to the factory settings: IMAGE SIZE, MULTI PICTURE, ASPECT
ADJUST, H-SHIFT, H-SIZE, V-SHIFT and V-SIZE.
PIXEL DENSITY
P I X E L DENS I T Y
S T ANDARD / H I GH
Selects the line density.
STANDARD: Normally make printouts using this setting.
HIGH: Sets the print line density to high density and obtains the better print
quality. However, the printing speed is slower than in the STANDARD mode.
Connection and Adjustment 87