3
Place the paper roll in the printer.
When the UPP-210SE/210HD is used:
Place the paper with
the thermo-sensitive
side (printing side)
facing up.
When the UPT-210BL is used:
Place the paper with
the thermo-sensitive
side (printing side)
facing up.
4
Insert the end of the paper into the paper insertion slot manually and feed the
paper until its end comes out from the paper outlet.
Note
Be sure to set the paper in the middle of the paper insertion slot and between
the guides to avoid any paper jamming.
Note
Be sure to remove any slack in the roll when pulling out the paper or film.
Continue to next page m
Operation
59