Tips on usage
• Toast mixed-flour breads at higher browning
levels than white bread. Matured, dry bread
browns faster than fresh bread.
• Avoid using slices that are too big or too thick, as
these can easily become jammed in the appliance.
Attention:
In the event of a malfunction and when cleaning
the appliance, remove the power plug from the wall
socket. Risk of electric shock!
• Loosen jammed slices of bread with a blunt wooden
object (e.g. a wooden spatula or spoon). Do
NOT touch the heater elements.
• Differences in bread sorts, moisture and the thick-
ness of individual slices influence the browning
of the toast. Therefore the bread for toasting
should be kept in sealed packaging until required.
Notice
Each time you press a button, and also when pressing
the operating slide down, you will hear a signal
tone to confirm the activation.
When a toasting process is complete, 3 signal tones
sound.
Items supplied
Toaster
Operating Instructions
Check that all of the items supplied are available as
listed.
Remove all packing materials.
Description of the appliance
1 Operating slide
2 Button for the thaw function
3 Browning button
4 Button for the warm-up function
5 Stop button for interrupting the toasting
process
6 Lever for bread-roll attachment
7 Bread roll holder
8 Toasting slots
9 Crumb tray
Placement
• Unwind the cable from the cable storage on the
bottom of the appliance and run it through one
of the side clamps so that it cannot be trapped.
• Place the toaster on a dry and level surface.
Before taking into use
• Heat the toaster up twice, at the maximum set-
ting (8), without the insertion of bread slices.
For details on cleaning the appliance read the
section »Cleaning and Care«.
Please take note:
The operating slide 1 only engages when the cable
is connected to a mains power socket. With the first
usage a slight smell can arise (minimal smoke deve-
lopment is also possible). This is normal and dissipates
after a short time. Provide for sufficient ventilation.
- 3 -