Tips On Usage; Appliance Description; Setup; Before Taking Into Use - Silvercrest STOS 826 A1 Bedienungsanleitung

Tips on usage

• Toast mixed-flour breads at higher browning levels
than white bread. Matured, dry bread browns
faster than fresh bread.
• Avoid using slices that are too big or too thick,
as these can easily become jammed in the appli-
ance.
Attention:
In the event of a malfunction and when cleaning the
appliance, remove the power plug from the wall
socket. Risk of electrical shock!
• Loosen jammed slices of bread with a blunt woo-
den object (e.g. a wooden spatula or spoon).
Do NOT touch the heater elements.
• Differences in bread sorts, moisture and the thick-
ness of individual slices influence the browning
of the toast. Therefore the bread for toasting should
be kept in sealed packaging until required.

Appliance description

1 Bread roll holder
2 Toasting slots
3 Operating button
4 Button for the thaw function
5 Button for the warm-up function
6 Stop button for interrupting the toasting process.
7 Toasting dial
8 Crumb tray
9 Button for the bread-roll attachment

Setup

• Unwrap the power cable from the cable winder on
the underside of the appliance.
• Place the toaster on a dry and level surface.

Before taking into use

Heat the appliance up at least five times, at the
maximum setting (7), without the insertion of bread
slices. For details on cleaning the appliance, read the
section "Cleaning and Care"..
Please take note:
The operating button 3 only engages when the
power cable is connected to a mains power socket.
On the first usage, a slight odour can occur (mini-
mal smoke development is also possible). This is
normal and stops after a short time. Provide for
sufficient ventilation.

Adjusting the browning level

The desired level of browning, from "light" (1) to
"dark"" (7), can be adjusted infinitely with the
toasting dial 7.

Toasting

Attention :
When the appliance is in operation, do NOT cover
the toasting slots 2. There would be a risk of fire!
The appliance could be irreparably damaged!
• After setting the desired browning level, place
the bread into the toasting slots 2.
• Press the operating button 3 downwards. The
control lamp on the stop button 6 glows.
• The automatic bread aligner centres the inserted
bread into the toasting slots 2.
• When the desired level of browning has been
reached the toaster switches itself off automati-
cally and the slices are ejected to the top.
- 3 -