Siemens SITRANS F-Serie Bedienungsanleitung Seite 48

Appendix
A.1 I/O Connections and Wiring
①
②
③
④
⑤
⑥
Vc: 2VDC (min) to 12 VDC (max)
For Vc = 5 VDC to 12 VDC use:
R= 2.4k ohms, 0.1 Watt (min)
For Vc less than 5 VDC select:
R to acheive I = 1.1mA (min)
Terminal Block Wiring - 1010DXS2-7
(Refer to manual drawing 1010DXS2-7 sheet 3 of 4. When Barriers are used, isolation is
limited to the Barrier's working voltage. Refer to table on manual drawing 1010-341 sheet 3).
These connection diagrams apply to the part numbers listed below.
Table A- 4
FUS1010
46
Flow meter
D1 Input
D1 Return
D2 Input
D2 Return
Barrier
Part Numbers and Connection Diagrams
Isolated Digital Inputs
1010DXS2-7 (Sheet 3 of 4) Drawing
7ME3601-ab
where:
a= 2
b= D or F
FUH1010 IP65 NEMA 7 Interface Detector Quick Start
Operating Instructions, 06/2014, A5E02428148-AA