How Does My Landroid; Finding The Charging Base; Rain Sensors; Sensing The Boundary Wire - Worx Landroid Bedienungsanleitung

5.2 How does my Landroid

®
Your Landroid is capable of doing things on its own. The Landroid
charge, can sense when it is raining, can stop itself if it senses a problem, and knows to stop, draw back, and then turn
around when it bumps into something blocking its path or other object. The Landroid
Turning Disc (13) from rotating if it is lifted off the ground to prevent an accident.
A. Finding the charging base
When your Landroid
direction back to its Charging Base. Landroid
By default, Landroid
If you don't want to enable boundary cut, deactivate it via your smartphone. (Only for specific model, please check Technical
Data & Declaration of Conformity)
B. Rain sensors
®
The Landroid is equipped with a Rain Sensor (7) which detects
rain drops and tells the Landroid
Boundary Wire back to its Charging Base (See Fig. B).
®
Landroid will come out mowing again after passing the Delay Time,
The default Delay Time is 180mins and is changeable. (Delay Time
setting can be changed via Landroid
this is only for specific models, details refer to Technical Data &
Declaration of Conformity section)
When the rain sensors are wet, the Landroid
station. Only when the rain sensors become dry will the Landroid
begin the delay start countdown or return to mowing immediately.
NOTE: If the delay time is set to 0, Landroid
C. Sensing the boundary wire
®
The Landroid always obeys the border set by the Boundary Wire
and uses sensors at its front to sense when it is getting close (See Fig. C).
10
D. Starting and stopping while mowing (See Fig. D, E1, E2)
If you would like to command the Landroid
To start mowing, turn the Main switch to "I" (on), press
®
If Landroid senses that something is wrong, it will indicate a fault message via the error indication light. And Landroid
it does not receive any input from the user within 20 min (for information on fault messages refer to the Error Messages).
To resume:
• Turn the Main switch (8) to "O"(off)
• Correct the problem (refer to Error Messages)
• Turn the Main switch (8) to "I"(on)
• Press , then press
• Now the Landroid
C
Lawn Mowing Robot
®
needs to recharge, it will stop mowing and follow the Boundary Wire (17) in an anti-clockwise
®
is pre-programmed to mow the grass near the boundary wire once a week.
®
will mow near the boundary wire at a random time during the next week after it is powered on.
®
to stop mowing and follow the
®
Apps in your smartphone,
®
returns to its docking
®
will continue mowing.
®
to stop mowing, then simply press the STOP button (9) on top of the mower.
®
will begin to mow!
®
know what to mow?
®
knows when it needs to go to its Charging Base (3) to
®
B
, then press .
D D
®
will also automatically stop its Blade
®
will turn off if
EN