Ce Certification; Environmental Declaration; Product Description - Exhausto SEF series Handbuch

3002314-2019-05-20.fm

1.4 CE certification

1.5 Environmental declaration

Product
description
Materials and
handling
Materials in %
EC Declaration of Conformity: See document no. 3004050, Declaration of Conformity
(enclosed). It is also available on the EXHAUSTO website (search using document no.)
THE SEF smoke extraction fan is manufactured in cast aluminium with a centrifugal
impeller and has vertical exhaust.
SEF is made of die-cast aluminium and surface treated with hammer varnish, which
makes it light, mechanically strong and extremely resistant to corrosion. The motor is a
temperature resistant, sealed asynchronous motor with lifetime lubricated ball bearings.
This ensures a long service life, high efficiency and low noise levels.
The fan has drainage holes in the bottom section
to allow rain water to drain away. It is easily opened for servicing and cleaning.
The table below shows the materals used in the fan and handling of these.
Product parts
Top section, bottom section, centrifugal
impeller, centrifugal insert, top cover, motor
plate.
Net, safety fitting, sheet metal parts, armoured
cable, screws.
Motor
Insulation
Labels, instructions, sealing, vibration
dampers, packaging
The table below shows the materials in % of the total weight of the SEF.
Matrial SEF250
Aluminium 81%
Steel 15%
Copper 1%
Mineral wool 2%
Other 1%
Matrial
Aluminium
Steel
Aluminium,
steel og
copper
Mineral wool
Other
SEF315
79%
16%
2%
2%
1%
26/28
Handling
Recycleable
Recycleable
For recycling after
disassembly
For recycling after
disassembly
Dumping or
incineration
SEF400 SEF450
82% 48%
14% 46%
2% 2%
2% 2%
1% 1%