Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing the hood
32
Hood calibration
After the hood has been installed, the aspiration panel must be calibrated.
This operation is necessary to regulate the power exstraction of the aspiration
panel. Connect the product to the power line, making sure that it is
conformed to the supply voltage indicated on the technical data tag.
Pushing the ON/1 the aspiration panel rises. After it has reached a height of
18 cm from the cooktop, press OFF, to stop the extraction then the Timer
(fig.11F) and after sec. the OFF button.
The hood will carry out the calibration of its aspiration panel rising and retracting
for some centimeters.
During this phase, the buttons on the pushbutton control panel blink.
fig.11
Werbung
Kapitel
Inhaltsverzeichnis
