Installing The Hood - AEG DH1690-M Bedienungsanleitung

Installing the hood

Make sure that once the appliance is installed it is easily accessible by a
technician in case repairs are required in the future. Incorrect installation may
make the hood unsafe.
The installation must be in conformity with local statutes regulating the
evacuation of waste air.
1) Before installing the appliance, make sure that none of the parts is damaged
in any way. In case of damaged parts, contact your retailer and do not proceed
with installation.
Read all of the following instructions with care before installing the appliance.
For optimal performance in evacuation mode:
- the evacuation route should be short and direct
- the number of bends in the pipes should be minimal
- the path of the pipes should contain bends rather than sharp angles
- the diameter of the pipes should be as large as possible, preferably the
same diameter as the evacuation opening.
- use approved piping that meets current standards.
fig.1
fig.3
Installing the hood
29
fig.2
fig.4