Wiring Temperature Sensor To Transmitter - Siemens SITRANS FUT1010 IP65 NEMA 4X Bedienungsanleitung

Connecting
3.1 Transmitter Wiring
3.1.3

Wiring Temperature Sensor to Transmitter

Wiring Temperature Sensor Board to Transmitter
Set transmitter and instrumentation power to OFF when inserting or removing the Analog
Input Module, or when making connections to TB1, TB2, TB3 and TB4.
1. Disconnect power to the transmitter.
2. Open transmitter top cover by releasing the cover latch.
3. Loosen the captive screw securing the Access Cover and remove Access Cover.
4. Using a flat-blade screwdriver, remove four screws securing the I/O Module board. Remove
22
DANGER
board and set it aside.
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 6/2010, A5E02639182A Revision 02