Cleaning And Maintenance - Electrolux Iron AidTM EDI97170W Benutzerinformation

18 electrolux
• the insoles should be placed beside the
shoes on the drying rack and the shoela-
ces should be tied

CLEANING AND MAINTENANCE

Cleaning lint filters
To ensure that the appliance works perfect-
ly, the lint filters in the door and in front of
the drum must be cleaned after every Iron
TM
Aid or drying cycle.
Caution! Important. Never operate the
dryer without the lint filter or with a
damaged or blocked lint filter.
1. Open loading door
2. Use a damp hand to clean the micro-
fine filter, which is built into the lower
part of the loading aperture.
3. After a period of time, a patina due to de-
tergent residue on laundry forms on the
filters. When this occurs, clean the filters
with warm water using a brush. Remove
the filter from the door pulling it out. It
can be positioned with the tooth facing
to the left or to the right). After cleaning
do not forget to put it back.
4. Remove fluff from lint filter, preferably us-
ing a damp hand for this purpose.
5. Replace the filter.
Cleaning the water recirculation valve/
filter
Caution! Remove and clean Steam
Water Filter every 6 months
The valve/filter is placed behind the tank han-
dle - see chapter "Product description".