Starting A Drying Programme - Electrolux Iron AidTM EDI97170W Benutzerinformation

16 electrolux
Caution! Caution: Make sure that by
selecting the DRYNESS function, you
do not over-dry your wool or silk.
DELICATE (DELICATE)
For especially gentle drying of sensitive fab-
rics with the care label and for temperature-
sensitive textiles (e.g. acrylic, viscose). Pro-
gramme is executed with reduced heat.
DELICATE is only suitable for use with
loads of up to 3kg.
1. Press the DELICATE button. The
ICATE symbol appears in the display.
TIME (TIME)
To select the programme duration after set-
ting the TIME programme. You can se-
lect a programme duration from 10 minutes
to 3 hours in 10-minute steps. (correspond-
ing to the COOLING (COOLING) pro-
gramme).
1. Turn the programme knob to the
TIMED PROGRAMME. The
minutes is in the display

STARTING A DRYING PROGRAMME

Press the START/PAUSE button. The pro-
gramme is started. The programme pro-
gress display shows drying progress. The
symbols for DRYING and
appear in the display one after the other.
The number of droplets in the dryness indi-
cator gradually goes down as the drying
process progresses.
Changing a programme
To change a programme which has been se-
lected by mistake once the programme has
started, first turn the programme selector to
O off and then reset the programme.
The programme can no longer be
changed directly once the programme
has started. If you nevertheless attempt
to change the programme with the pro-
gramme knob or an additional function
button (except the BUZZER button),
the START/PAUSE button and
will flash in the multi-display. The drying
programme is not however affected by
this.
2. Press the TIME button repeatedly until
the desired programme duration is
shown in the display, e.g.
If the programme duration is not selected,
the duration is automatically set to 10 mins.
BUZZER (BUZZER)
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions -
BUZZER "
DELAY (DELAY)
DEL-
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions - DE-
LAY "
CHILD LOCK
See chapter "Iron AidTM Steam System" ,
section "Selecting additional functions -
CHILD LOCK"
Removing laundry or loading laundry
when necessary
Warning! Laundry and drumcan be-
COOLING
come hot. Risk of burns!
1. Open loading door
2. Load or remove laundry items.
3. Close the door securely. Lock must au-
dibly lock.
4. Press the START/PAUSE button to con-
tinue the drying cycle.
Drying cycle complete / removing
laundry
Once the drying programme has finished,
CREASE GUARD lights up in the dis-
play. If the
ble signal sounds at regular intervals.
The drying cycle is automatically fol-
lowed by a anti-crease phase which
lasts around 30 minutes.
The drum rotates at intervals during this
phase. This keeps the laundry loose and
free of creases. It can be removed at any
time during the anti-crease phase. (The laun-
dry should be taken out towards the end of
for a programme of 20 minutes.
BUZZER is activated, an audi-