Transport, Storage, Unpacking - Siemens simovert masterdrives Betriebsanleitung

04.2006
4

Transport, Storage, Unpacking

Transport
Storage
CAUTION
Unpacking
Siemens AG 6SE7087-6KD60
SIMOVERT MASTERDRIVES
The units and components are packed in the manufacturing plant
corresponding to that specified when ordered. A packing label is
located on the outside of the packaging. Please observe the
instructions on the packaging for transport, storage and professional
handling.
Vibrations and jolts must be avoided during transport. If the unit is
damaged, you must inform your shipping company immediately.
The units and components must be stored in clean, dry rooms.
Temperatures between -25 °C (-13 °F) and +70 °C (158 °F) are
permissible. Temperature fluctuations must not be more than 30 K per
hour.
If the storage period of two years is exceeded, the unit must be newly
formed. See Section "Forming".
The packaging comprises board and corrugated paper. It can be
disposed of corresponding to the appropriate local regulations for the
disposal of board products. The units and components can be installed
and commissioned after they have been unpacked and checked to
ensure that everything is complete and that they are not damaged.
Operating Instructions
Transport, Storage, Unpacking
4-1