Tips And Tricks; Maintenance And Cleaning - Parkside PFBS 12 B2 Originalbetriebsanleitung

■ The maximum diameter of the assembled grind-
ing bodies, grinding cones, pencil grinders with
a thread insert may not exceed 55 mm .
The maximum diameter of sandpaper grinding
accessories may not exceed 80 mm .
NOTE
► The max . permissible length of a mandrel is
33 mm .
■ Store the accessories in the original box or store
the accessory components somewhere else to
protect them from damage .
■ Store the accessories somewhere dry and not in
the vicinity of aggressive media .

Tips and tricks

■ If you exert too much pressure, the fitted tool
can break and/or the workpiece could be dam-
aged . You will achieve optimum working results
by moving the tool over the workpiece at a
steady speed and while exerting light pressure .
■ When carrying out cutting work, hold the appli-
ance firmly with both hands .
■ Observe the data and the information in the
table to prevent the end of the spindle from
touching the perforated base of the grinding
tool .
■ 28 │ GB │ IE

Maintenance and cleaning

The appliance is maintenance-free .
■ Remove all dirt from the appliance . Use a dry
cloth to do this .
■ At the beginning and end of an extended
period of non-use, charge the battery fully .
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
WARNING!
■ Have the power tool repaired by the
service centre or a qualified electrician and
only using genuine replacement parts. This
will ensure that the safety of the appliance is
maintained .
WARNING!
■ Always ensure that the power plug or
the mains cable is replaced only by the
manufacturer of the appliance or by an
approved customer service provider. This
will ensure that the safety of the appliance is
maintained .
NOTE
► Replacement parts not listed (such as the
charger) can be ordered via our service
hotline .
PFBS 12 B2