Allocation Of The Cable Glands Of The Wall-Mounted Versions - bürkert 8205 Bedienungsanleitung

3 INSTALLATION

3.2.5 Allocation of the cable glands of the wall-mounted versions

When connecting a wall-mounted version, pass the cables through the cable glands by
preferably respecting the following allocation in order to ease the wiring:
pH and Pt cable
Current output cable
3.2.6 Electrical connection, wall-mounted version, 15-30 VDC
Before wiring the device, please read § 3.2.1.
Unscrew the 4 screws of the cover and unscrew the cable glands. Pass the cables
through the cable glands by preferably respecting the allocation indicated in § 3.2.5.
Connect the terminals as the panel-mounted version according to § 3.2.4.
Connect the pH sensor to the electronic board (see § 3.2.4) after having inserted the
reducer into the cable gland, if need be, and passed the pH sensor cable through the
reducer.
PH CONTROLLER 8205
Transistor and relay cable
15-30 VDC or 115/230 VAC
supply cable
E-19-