Lotus RHDA-304E Bedienungsanleitung Seite 39

TEMPERATURE INSIDE THE
CHAMBER IS TOO HIGH
THE OVEN WILL START
WASHING WILL START
NOTE: to facilitate the dissolution of dirt, we advise to spray the internal part of the cooking
chamber with a degreasing product suitable for oven cleaning.
In models equipped with automatic washing with liquid detergent, in the
back side of the ovens supplied with automatic washing system, there
are 2 small pipes for the suction of detergent and sparkling-aid.
The red color pipe must be inserted into the liquid detergent container.
The white color pipe must be inserted into the liquid sparkling-aid con-
tainer.
IMPORTANT NOTE: ensure that the liquid detergent and sparkling-aid
are specific for stainless steel cleaning.
Check frequently the level of the detergent and sparkling-aid inside their
containers, in order to avoid any damage to the pump if it works in vain.
Fig. E. If the chamber is too hot to start a washing cycle, the oven will show a message like the one shown on
the side.
The cooling cycle before the washing cycle can be effected both with open (in a shorter time) and with closed
door (in a longer time).
If you open the door to make cooling cycle quicker, wait for the following message (end of cooling) to close it
again.
Fig. F. Once the washing cycle has started, it's necessary to complete it, to avoid eventual detergent residuals
can contaminate the food during the following cooking processes or damage the stainless steel surfaces, when
in touch with too high temperatures.
If the oven is stopped during an automatic washing cycle, when you turn it on again the display will show a
warning message shown on the side, to remind you that you need to remove eventual detergent residuals and
effect a rinsing cycle before any cooking cycle.
FORCED COOLING
PLEASE WAIT
AFTER COOLING
Fig. E
THE OVEN HAS BEEN
IRREGULARLY SWITCHED OFF
DURING A WASHING CYCLE
REMOVE EVENTUAL
DETERGENT RESIDUALS
DO A RINSING CYCLE
17
Fig. F
EN