Your Product At A Glance - Lux Tools B-46 H Originalbetriebsanleitung

Rasenmaeher_Benzin_401171.book Seite 51 Dienstag, 22. September 2015 2:51 14
• When the motor is shut off, the gas pedal
must be set to the [Stop] position. The
petrol valve must be closed (if present).
• Operating the machine at excess speed
can increase the risk of accident.
• When turning on the machine, make sure
that your fingers are not caught between
the moving cutting blades and fixed parts
of the machine.
Maintenance and storage
• Make sure that all nuts, bolts and screws
are firmly tightened. You will then know
that the product is in a safe working con-
dition.
• While petrol is in the tank, never store the
lawnmower in a building in which petrol
vapours may come into contact with
naked flames or sparks or can be easily
ignited.
• To avoid the risk of fire keep the motor,
exhaust, and petrol tank area away from
grass, leaves, and leaking grease (oil).
• Regularly check the grass catcher for
wear or loss of functionality.
• Let the motor cool before turning off the
machine.
• When maintaining the cutting blades,
please note that the cutting blades can
be moved even when the machine is
switched off.
• For safety reasons always replace worn
or damaged parts. Use only original spare
parts and accessories.
• Should the tank need draining, do so out-
doors using a petrol suction pump.

Your product at a glance

Note: The actual appearance of your
product may differ from the illustra-
tions.
► P. 3, item 1
1. Throttle
2. Handlebar
3. Handlebar, bottom part
4. Motor
5. Lever for cutting height adjustment
6. Safety flap
7. Collection bag in construction
8. Pull starter holder
► P. 3, item 2
9. Pull-starter
10. Tank cover
11. Fuel pump
12. Air filter housing
13. Ignition cable with spark plug
14. Exhaust silencer
15. Motor oil filling screw
► P. 4, item 3
16. Form screw M8 × 42 mm
18. Stop bolt for guide pin
19. Bottom pull starter holder
► P. 4, item 4
21. Hexagon nuts M8
22. Toggle
23. Assembled toggle nut
24. Borehole for stop bolt
► P. 5, item 5
25. Cross nut bolt M8
26. Clamping lever
27. Carriage bolt M8 × 50 mm
28. Washer
29. Assembled clamping lever
30. Bowden cable clips
► P. 5, item 6
31. Collection basket upper
32. Carry handle
► P. 6, item 7
33. Collection bag
► P. 6, item 8
34. Tank cover seal
► P. 7, item 10
35. Air flap
► P. 8, item 11
36. Blade
37. Blade screw
38. Journal of the blade seat
39. Washer for blade screw
► P. 8, item 13
40. Air filter
► P. 9, item 16
41. Spark plug
Scope of supply
• Instructions for use
• Lawn mower
• Handlebar
• Handlebar, bottom part
• Spark plug wrench
• Collection basket upper
• Carry handle
• Collection bag
• Cross nut bolts M8 (2×)
GB
51