Inhaltsverzeichnis
Werbung
1.
Extension tube
2.
Engine
3.
Switch
4.
Holder
5.
Wing screw
6.
Saw head
7.
Chain protection cover
8.
Inner hexagon screw
9.
Inner hexagon screw
10.
Washer
11.
Retaining ring
12.
Strap
13.
Fuel pump
14.
Spark plug socket
Warranty
Warranty claims according to the warranty certificate attached.
General Safety Instructions
The instruction manual should be read in full prior to the initial use. In case of any doubts regarding connection and operation of the
unit, turn to the manufacturer (servicing department).
TO GUARANTEE A HIGH DEGREE OF SAFETY, THE INSTRUCTIONS BELOW SHOULD BE OBSERVED:
CAUTION!
•
Before getting down to work with the pruner, a flat and non-skid workplace providing for sufficient room and freedom of
movement
•
Observe any of the instructions contained herein before you start working with the pruner and in the course of the work.
•
Do not operate the tool if you are tired or under effect of alcohol or drugs.
•
Save these instructions. .
•
When not in use, the unit should be stored indoors in a dry place – out of reach of children.
•
Any relevant regulations of accident prevention and other generally recognised safety technical rules should be observed.
•
Keep notebooks of professional association (VBG 7j).
•
Use of other than genuine tools and accessories may result in a risk of accident. .
•
Upon completion of a repair or maintenance, any protection and safety devices should be re-installed immediately.
•
Any damaged or defective protection devices should be replaced immediately. .
•
The persons working with the pruner should not be diverted to lack the concentration.
•
Clean the chips and cluttered parts of branched away from the working site. .
•
Do not use the pole pruner in windy weather or in a storm.
The pruner is intended for wood cutting only. Do not use it for other purposes. Do not use it to cut objects other than wooden.
Emergency Procedures
Give first aid appropriate to the injury and call a qualified medical help as fast as possible.
Protect the injured against more harm and put him/her in a resting position.
Unit Marking
Meaning of Symbols
Symbols shown below are used in this manual and on the unit:
Product Safety:
Product conforming
to respective EU
standards
Bans:
General Prohibition
(in combination with
unprotected light, no
another pictograph)
No fire, no
Do not touch
smoking
15.
Choke
16.
Starter
17.
Fuel tank
18.
Air filter
19.
Saw chain
20.
Bar
21.
Driving mechanism lubricator
22.
Oil tank
23.
Adjusting screw
Do not Reach in
Equipment
Do not use the
machine in wet
weather
Werbung
Inhaltsverzeichnis
