Inhaltsverzeichnis - Nice POA1 Anweisungen Und Hinweise Für Den Installateur

POA1
Table of contents:
1 Product description
2 Installation
2.1 Typical system layout
2.2 Preliminary checks
2.3 Electrical connections
2.3.1 Electrical diagram
2.3.2 Description of the connections
2.3.3 Notes about connections
2.3.4 STOP type input
2.3.5 Examples of photocell connections without the
photo-test function
2.3.6 Examples of photocell connections with the
phototest function.
2.3.7 Checking the connections
2.4 Automatic search system for the limit switches
3 Testing
4 Diagnostics
5 Pre-set functions
Warnings:
!
This manual has been especially written for use by quali-
fied fitters. The information provided in this manual is of no
use to end users!
This manual refers to the POA1 control unit and must not be
used for any other products.
2
page
3 6 Programmable functions
6.1 Direct programming
3 6.2 Level one programming, part one
3 6.3 Level one programming, part two
4 6.4 Level two functions
4
4 7 Programming
5 7.1 Programming methods
5 7.1.1 Level one programming: functions
6 7.1.2 Level two programming: parameters
6 7.2 Memory deletion
7.3 Example of level one programming
7 7.4 Example of level two programming
7.5 Programming diagram
8
8 8 Optional accessories
9 9 Servicing the POA1 control unit
9.1 Disposal
9
10 What to do if...
9
11 Technical characteristics
Annex Radio receiver
The POA1 control unit has been designed to control electromechanical
actuators for automated swing gates or doors; any other use is consid-
ered improper and is consequently forbidden by the laws currently in
force. Do not install the unit before you have read all the instructions at
least once.
page
9
9
10
10
10
11
11
12
12
13
13
13
14
15
15
15
15
16
17