Inhaltsverzeichnis
Werbung
2
INSTALL
MOWER
AND DRIVE
BELT
Be sure tractor is on level surface and mower suspension arms
(3) are raised with attachment
lift control. Engage
parking
brake.
Cut and remove ties securing anti-sway bar (1) and belts.
Swing anti-sway bar to left side of mower deck.
Slide mower under tractor.
IMPORTANT:
CHECK
BELT FOR PROPER
ROUTING
IN
ALL MOWER
PULLEY
GROOVES.
Lower mower suspension
arms (3) with attachment
lift
control.
Be sure belt tension rod (2) is in disengaged
position.
Install belt into electric clutch pulley groove (8).
Place the suspension
arms (3) on outward pointing deck
pins. Retain with double loop retainer springs (B).
Install front plate assembly (4) to tractor suspension brack-
ets (5) and retain with single loop retainer springs (A) as
shown.
Position front plate assembly between front mower brack-
ets (6). Raise deck and plate assembly to align holes and
insert flanged
pins (7). Secure pins with double
loop
retainer springs (B) between
the plate assembly
and
mower brackets.
NOTE: To assist in locating hole in flanged pin (7), the hole in
pin is inline with notch on head of pin.
Engage belt tension rod by pushing rod (2) into locking
bracket (9).
Connect anti-sway bar (1) to chassis bracket (10) under
left footrest and retain with double loop retainer spring (B).
Raise deck to highest position.
Adjust gauge wheels (11) before operating mower.
1. Anti-sway bar
2.
Belt tension rod
3.
Suspension
arms
4.
Front plate assembly
5. Tractor suspension
bracket
6.
Front mower bracket
7.
Flanged pin
8.
Clutch pulley
9.
Locking Bracket
10. Chassis bracket
11. Gauge wheel
A.
Single loop retainer spring
B. Double loop retainer spring
11
6
8
23
Werbung
Inhaltsverzeichnis
