Christie LX505 Kurzanleitung Seite 14

Remote Control
⑮
⑯
⑰
⑱
⑲
⑮ D.ZOOM button
Select the Digital zoom +/- mode and resize
the image.
⑯ INPUT 1- 3 buttons
Select an input source (INPUT 1 – INPUT 3).
⑰ KEYSTONE button
Correct keystone distortion.
⑱ ZOOM ▲▼ buttons
Zoom in and out the images.
⑲ FOCUS buttons
Adjust the focus.
⑳ RESET/ON/ALL-OFF switch
When using the remote control, set this
switch to "ON". Set it to "ALL OFF" for power
saving when it is not in use. Slide this switch
to "RESET" to initialize the remote control
code.
FILTER button
Scroll the filter.
Remote Control Operating Range
Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the
buttons. Maximum operating range for the remote control is about 16.4' (5 m) and 60 degrees in front,
back and top of the projector.
Infrared Remote Receivers are provided in front, back and top of of the projector. You can conveniently
use all of the receivers.
LX505/605
⑳
LENS SHIFT button
Select the Lens Shift function.
FREEZE button
Freeze the picture on the screen.
P-TIMER button
Operate the P-timer function.
R-CLICK button
Act as the right mouse button for wireless
mouse operation.
POINTER button
Act as the On-Off switch for the Pointer.
NUMBER buttons
Act as number buttons. Use these buttons
when setting the remote control codes or
when entering the PIN code numbers.
12 Setup Guide
020-000540-01 Rev. 1 (11-2010)
For PIN code
and remote
control code.