_MWE-2000_2500-4FM.book Seite 48 Freitag, 23. Juni 2006 8:17 08
Technical description
Note
Situations may arise where the parking aid does not detect objects
or fails to signal their distance correctly, due to their physical char-
acteristics.
Note the five following examples.
Example 1 (fig. 8, page 7)
Objects which are not in the detection area of the sensors from the very start
cannot be detected.
Example 2 (fig. 9, page 7)
When moving towards an object with an irregular or jagged surface, the
shortest distance to the object may not be signalled. In the example, A is not
signalled, but only B or C instead.
Example 3 (fig. 0, page 7)
For diagonal obstacles, the shortest distance A is signalled.
Example 4 (fig. a, page 7)
The sensors are sometimes unable to detect very narrow obstacles such as
fence posts.
Example 5 (fig. b, page 7)
In this case, the parking aid displays the distance A. As the vehicle approach-
es, the audible indicator changes to the stop signal. As the vehicle approach-
es even closer, the distance A goes into the blind spot, so that the parking
aid signals the distance from point B.
48
MWE2000, MW2500