Cleaning of Main Brush and Floor Brush:
1. Clear the hair or big dust particles on the brushes regularly
to improve the cleaning performance. Clean the dust at the
air intake. Clean the paper scraps or small particles by
cleaning brush directly. Rotate the brush carefully and cut
the hair, yarn and other twisted objects by scissors or pull
them by hand.
2. The cleaning of the main brush and floor brush can be
done by reference to the assembly & disassembly.
Assembly & Disassembly and Cleaning of Front Wheel:
1. Clean the front wheel with a clean brush. (Refer to the
figure below)
Failure information which may appear during using:
Failure Code Failure Cause
E001
Ground detection
sensors
E002
Middle brush
E003
Power off
E004
Left & right wheel
E005
Dustin poor contact
If the failure still exist after the above check, please contact the after-sale service maintenance, pro-
fessional maintenance staff or the technical center of the company, don't disassemble and maintain
it by yourself.
How to solve
Clean the sensors at the front bottom of the cleaner
Clean the rubbish such as hair, thread wrapped on the brush
Use the adaptor to charge, after full charged, then use again
Check the left and right wheels, clean the rubbish on it
Check the dustbin and re-fix the dustbin after cleaning
20