Functions Of Buttons - Klarstein Cleanhero 10009785 Bedienungsanleitung

Power switch:
Switch on the cleaner to enter into a standby status, the indicator would light on;
Tips:
The power indicator lights on when the cleaner is working;
The power indicator blinks during charging;
When the cleaner is fully charged, the power indicator stops blinking;
AUTO (automatic cleaning):
Press AUTO button to let the cleaner automatically clean. When the battery power is at a low level,
it will automatically search for the docking station;
Press any button on the machine panel to stop cleaning.
Tips:
In case of low battery during cleaning,the cleaner would toot for 10 times and it automatically
searches for the docking station for charging with the CHARGE button light on.
Before cleaning, you should clear the clutter on the floor.
SPOT (spot cleaning):
Press SPOT button to automatically enter into an area of 1square meter and clean in a spiral mode
for about 2-3 minutes;
Press any button on the machine panel to stop cleaning.
Tip:
In case of low battery during cleaning,the cleaner would toot for 10 times and it automatically
searches for the docking station for charging with the CHARGE button light on.
CHARGE (charge):
Press CHARGE button, the machine automatically searches for the docking station.
Press any button on the machine panel to stop.
NOTE:
The default setting of the cleaner system is in fast mode , you can select fast or slow mode by remote
control.
Charging Method of Main Body:
Manual Charging:
1. You can use the adapter or docking station
to charge for the main body directly.
2. Turn on the cleaner and connect the out
put terminal of the adapter with DC socket
of the main boby while using the adapter
for charging.(Refer to Figure 1)

Functions of Buttons

14