Siemens SINUMERIK 810D series Handbuch Seite 400

18 PCI–Adapter
47 AD11 t/s
48 M power
49 AD9 t/s
50 mechanische
51 mechanische
52 XCBE0 t/s
53 P3V3 power
54 AD6 t/s
55 AD4 t/s
56 M power
57 AD2 t/s
58 AD0 t/s
59 P5 power
60 XREQ64 s/t/s (pull up)
61 P5 power
62 P5 power
in=input, out=output, t/s=tri state u. bidirektional, s/t/s=sustained tri state u. bi-
direktional, o/d=open drain
Signalnamen:
plexed on the same
18-400
47
48
49
Kodierung 50
Kodierung 51
52
53
54
55
56
57
58
59
60
61
62
XTRST
TMS
TDI
XINTA
XINTC
XRST
XGNT
AD(0..32)
XFRAME
XTRDY
XSTOP
SDONE
XSBO
PAR
XCBE0
XREQ
SINUMERIK 840D/840Di/810D Bedienkomponenten–Handbuch (BH) – Ausgabe 11.02
AD12 t/s
AD10 t/s
M power
mechanische Kodierung
mechanische Kodierung
AD8 t/s
AD7 t/s
P3V3 power
AD5 t/s
AD3 t/s
M power
AD1 t/s
P5 power
XACK64 s/t/s (pull up)
P5 power
P5 power
Test Reset
Test Mode Select
Test Data Input
Interrupt A
Interrupt B
Reset
Grant
System Address Bus/System Data Bus
Cycle Frame
Target Ready (=selected Device Ready)
Stoppt die aktuelle Transaktion
Snoop Done
Snoop Backoff
Parity
Bus Command(0) and Byte Enable(0) multi-
PCI–Pin
Request
 Siemens AG 2002 All Rights Reserved
10.00