Settings; Setting Water Hardness; Setting Coffee Temperature - Krups EA6910 Bedienungsanleitung

01_IFU-KR_COFFEEMAKER_EA6910_EN_Mise en page 1 28/05/10 14:48 Page5
KRUPS
SERIE EA69xx
3

SETTINGS

Plug the appliance into
the mains power supply
but do not turn it on.

3.1 Setting water hardness

!
Note : Appliances are pre-set in the factory for hardness level 3.
The "water tank" light
will come on.
3.2 Setting the coffee temperature
!
Note : Appliances are pre-set in the factory to 2, average temperature.
Press the steam key
to switch to coffee
temperature setting =>
3.3 Setting the automatic electrical power supply shut-OFF (auto-off)
!
Note : Appliances are pre-set in the factory to 1 hour.
5
h
Press the back of the cup Press the 'Service' and
stand to remove it.
keys at the same
time. .
Press the key as many
times as are needed to select
the hardness level for the
water used.
The 'calc' light will
come on.
The digital display for pa-
rameter setting is under
the servicing flap.
0 = Very soft
1 = Soft
2 = Moderately hard
3 = Hard
4 = Very hard
Press the key as
many times as are needed
to select the desired
coffee temperature.
1 2 3