Scale Removal Program - Krups EA6910 Bedienungsanleitung

01_IFU-KR_COFFEEMAKER_EA6910_EN_Mise en page 1 28/05/10 14:49 Page12
Empty your waste water
container and put it back
under the coffee outlets.
Remove and empty your
waste water container.
!
Note : If there is not enough water in the water tank when you start the program, the
to warn you. Add the appropriate amount of water to the container and cleaning will continue automatically.If
your machine is unplugged during cleaning or in the event of power failure, you will have to restart the clea-
ning program right from the start. This is essential due to water circuit rinsing reasons. In this case, you will
need to use another cleaning tablet. Be sure to complete the entire cleaning cycle to avoid any risk of irrita-
tion (seek medical advice if cleaning solutions are accidently swallowed).
The cleaning cycle is a continuous cycle. Do not put your hands under the coffee outlets and steam nozzle
during the cycle.
!
Caution! : Only use Krups (XS3000) cleaning tablets. We cannot be held responsible for any da-
mage that may result from the use of tablets from other brands. You can obtain clea-
ning tablets from Krups Service Centres.
!
Caution! : Make certain to protect your work surface during cleaning and scale removal cycles,
especially if it is made of marble, stone or wood.
10.3 Scale removal program - total duration : about 22 minutes
The quantity of scale deposited depends on the hardness of the water used.
n
n The appliance will automatically warn you by the 'calc' light coming on when you need to pro-
ceed with scale removal.
n This program is only accessible when the machine requests it.
! Caution! : To benefit from the guarantee conditions, it is essential to perform the appliance
scale removal cycle when informed to do so. Be sure to follow the procedure closely
step by step.
You can continue to use the appliance when the light is on, but you are advised to
perform the program as soon as possible.
!
Caution! : If your product is equipped with our Claris - Aqua Filter System F088 cartridge, please
remove it during the descaling operation.
Again press the 'Service'
button to start the second
rinsing cycle.
Empty the drip tray and fit Fill your water tank.
it again.
3 - Second rinsing ± 5 mn
The 'clean' light again becomes steady.
A second cleaning cycle will be run automatically.
This second rinsing cycle lasts about 5 minutes.
Once the second rinsing cycle has finished, the 'clean'
light will go off.
Your appliance
will be ready for
use again.
ENGLISH
light will come on
12