Parameterizing Steps - Siemens SIMOVERT MASTERDRIVES Betriebsanleitung

05.2003
9

Parameterizing Steps

NOTE
Detailed
parameterization
Power sections
CUVP
Power section definition
(P060 = 8)
Siemens AG 6SE7087-6JP60
SIMOVERT MASTERDRIVES
For a detailed description of the parameters of the unit, please refer to
Section 6 "Parameterizing steps" of the Compendium.
Detailed parameterization should always be used in cases where the
exact application conditions of the units are not known beforehand and
detailed parameter adjustments need to be made locally, e.g. on initial
start-up.
1. Power section definition (P060 = 8)
2. Board definition
3. Drive definition
4. Function adjustment.
Optional
boards
Board configuration
(P060 = 4)
Parameterizing with user settings (fixed setting, P060 = 2)
Factory settings (parameter reset) (P060 = 2)
Parameterizing with existing parameter files (download, P060 = 6)
Parameterizing with parameter modules(quick parameterization, P060 = 3)
Fig. 9-1 Detailed and quick parameterization
Operating Instructions
(P060 = 4, see Compendium, section 6.3.2)
(P060 = 5)
Supply
conditions
Motor
Motor
encoder
Drive setting
Function adjustment
(P060 = 5)
Parameterizing Steps
9-1