Stabilizing The Compressor Before Shipping; Shutdown; Equipment Disposal - EKOM DK50 DE Benutzerhandbuch

MAINTENANCE

Stabilizing the compressor before shipping

Before shipping, the compressor must
be stabilized to prevent movement.
Prior to fixation, it is necessary to
disassemble the plastic cover. The air
pump must be fixed to the base using
the four original M6 screws (see
picture). Assemble the plastic cover.

SHUTDOWN

If the compressor is not going to be used for a long period of time,
disconnected it from the main power supply and release the pressure in the
air tank.

EQUIPMENT DISPOSAL

• Disconnect the equipment from the main power supply.
• Release the pressure in the air tank.
• Dispose of the equipment according to local regulations.
• Parts used in this product have no negative impact on the environment
when disposed of properly.
18 NP-DK50 DE-16_08-2018