Fig. 13: Connect the cabinet to the compressor
13. PLACEMENT OF THE COMPRESSOR IN THE CABINET
13.1. DK50 2V/50S/M (Fig. 4-A)
Removal of cabinet door
Remove the door held by 2 screws and disconnect the display connector and the earthing lead.
Check to ensure the display connector is removed prior to removing the front
door as otherwise it could be damaged.
Compressor placement
Remove the connecting strip (17) in front of the cabinet.
Position the compressor within a distance of at least 500 mm from the cabinet to facilitate the
movement of the hoses and the power cord within the cabinet (Fig. 14).
NP-DK50 2V 50, 2x2V 110-AD-A-1_03-2022
38
INSTALLATION
03/2022