DAB AD x.x AC series Installations- Und Wartungsanleitungen Seite 86

2.2.3.1.2 Connecting a 4 - 20 mA current sensor
Single inverter connection:
The selected 4-20mA current sensor has 2 wires, one brown (IN +) to connect to terminal 11 of J5 (V+), and
one green (OUT -) to connect to terminal 7 of J5 (A1C+). A jumper should also be wired in between terminal
9 and 10 of J5. The connections are shown in Figure 8 and summarised in Table 5.
To enable use, the current pressure sensor must be configured via software, parameter PR in the installer
menu; refer to paragraph 6.5.7.
Figure 10: Connecting the 4 - 20 mA pressure sensor
4 – 20mA sensor connections
Single inverter system
Terminal
7
8 -10
11
Table 7: Connecting the 4 - 20 mA pressure sensor
ENGLISH
Cable to connect
Green (OUT -)
Jumper
Brown (IN +)
84