General Information; Symbol Explanation; Safety Notes; Correct Use - oventrop Multidis SF Einbau- Und Betriebsanleitung Für Fachpersonal

1

General information

1.1 Information regarding installation and operating
instructions
These installation and operating instructions serve the
installer to install the stainless steel distributor/
collector "Multidis" professionally and to put it into
operation.
Other valid documents – manuals of all system
components as well as technical rules – must be
observed.
1.2 Keeping of documents
These installation and operating instructions should
be kept by the user of the system for later reference.
1.3 Copyright
The installation and operating instructions are
copyrighted.
1.4

Symbol explanation

Safety guidelines are displayed by symbols. These
guidelines are to be observed to avoid accidents,
damage to property and malfunctions.
!
DANGER
DANGER indicates an imminent dangerous
situation which will lead to death or serious
injury if the safety guidelines are not observed.
!
WARNING
WARNING indicates a possible dangerous
situation which may lead to death or serious
injury if the safety guidelines are not observed.
!
CAUTION
CAUTION indicates a possible dangerous
situation which may lead to minor or moderate
injury if the safety guidelines are not observed.
NOTICE
NOTICE indicates a possible damage to
property which may occur if the safety
guidelines are not observed.
10
2

Safety notes

2.1

Correct use

Safety in operation is only guaranteed if the stainless
steel distributor/collector "Multidis" is used correctly.
The stainless steel distributor/collector "Multidis SF"
is used in hot water central heating and/or cooling
systems for individual room temperature control in
surface heating and cooling systems.
The stainless steel distributor/collector "Multidis SH"
is used in hot water central heating and/or cooling
systems for the distribution of the heating/cooling water
in installations with radiators.
Any use of the stainless steel distributor/collector
"Multidis" outside the above applications will be
considered as non-compliant and misuse. Claims of
any kind against the manufacturer and/or his authorised
representatives due to damages caused by incorrect
use cannot be accepted.
The observance of the installation and operating
instructions is part of the compliance terms.
2.2 Possible dangers at the installation location
and during transport
The case of an external fire has not been taken into
consideration when constructing the stainless steel
distributor/collector "Multidis".
!
WARNING
Hot or cold surfaces!
Risk of injury! Do not touch without safety
gloves. The stainless steel distributor/
collector "Multidis" may get very hot or cold
during operation.
Sharp edges!
Risk of injury! Only touch with safety gloves.
Threads, bore holes and edges are sharp.
Small components!
Risk of ingestion! Store and install the
stainless steel distributor/collector "Multidis"
out of reach of children.
Allergies!
Health hazard! Do not touch the stainless
steel distributor/collector "Multidis" and
avoid any contact if allergies against the
used materials are known.