Getting Started: Seh Utn Manager - SEH myUTN-50a Schnellinstallationsanleitung

Getting Started: SEH UTN Manager

After the SEH UTN Manager is started, the network will be scanned for connected
UTN servers. The network range to be scanned is freely definable.
All UTN servers found will be shown in the 'network list' together with the
connected USB devices. The required UTN servers will be selected and added to
the 'selection list'. The UTN servers listed in the selection list and the connected
devices can then be used by the user.
This chapter describes the first steps with the program.
'Starting the SEH UTN Manager'
'Assigning an IP Address to the UTN Server'
'Adding the UTN Server to the Selection List'
'Connecting the USB Device to the Client'
Detailed information on how to use the SEH UTN Manager can
be found in the Online Help. To start the Online Help, select
Help – Online Help from the menu bar.
Client and UTN server communicate via the UTN port 9200. This port must not be
blocked by a firewall. If necessary, you can change the port number and use a
secure UTN SSL port. A detailed description can be found in the myUTN User Manual.
Quick Installation Guide
10
11
12
13
[en] 9