Getting Started: Seh Utn Manager - SEH myUTN-50a Schnellinstallationsanleitung

 Getting Started: SEH UTN Manager
After the SEH UTN Manager is started, the network will be scanned for
connected UTN servers. The network range to be scanned is freely definable.
All UTN servers found will be shown in the 'network list' together with the
connected USB devices. The required UTN servers will be selected and added to
the 'selection list' . The UTN servers listed in the selection list and the connected
USB devices can then be used by the user.
This chapter describes the first steps with the program.
• 'Starting the SEH UTN Manager'
• 'Assigning an IP Address to the UTN Server'
• 'Adding the UTN Server to the Selection List'
• 'Connecting the USB Device to the Client'
Detailed information on how to use the SEH UTN Manager can
be found in the Online Help. To start the online help, go to the
menu bar and select Help – Online Help.
Important:
Client and UTN server communicate via the UTN port
9200. This port must not be blocked by a security
software (firewall). If necessary, you can change the port
number and use a secure UTN SSL port. A detailed
description can be found in the myUTN User Manual.
Quick Installation Guide

9

10

11

12
[de] 8