Start-Up; Fitting Wearing Parts To The Torch Body; Note Regarding The Inner Liner With Gas-Cooled Welding Torches - Fronius MHP series Bedienungsanleitung

Start-up

Fitting wearing
1
1
parts to the torch
body
3
3
**
Note regarding
the inner liner
with gas-cooled
welding torches
Screw on and tighten the gas nozzle as far as it will go
NOTE! If a plastic inner liner is used in the torch neck of a gas-cooled welding
torch, reduce the power figure shown in the technical data by 30%.
To operate gas-cooled welding torches at maximum power, use a steel inner liner
in the torch neck.
2
2
49