Soldering - Parkside PLS 48 D2 Gebrauchanleitung

Soldering

Inhaling the vapours may lead to headaches and fatigue
symptoms .
The soldering iron with a rated power of 48 watts is ideal for electronic
„
soldering .
Due to its design, it is particularly suitable for difficult to access and fine
„
soldering work .
Clean the soldering tip
„
After cleaning, the soldering tip must be tinned . Tin the hot soldering tip
„
by melting the solder
Bring the soldering tip to the soldering point and heat it .
„
Bring the solder (with flux) between the soldering point and the soldering
„
tip .
Apply additional solder until the entire solder joint is covered .
„
Immediately remove the soldering tip to avoid overheating the molten
„
solder .
Let the solder solidify and avoid vibrations .
„
NOTE
The flux is either contained in the solder or it is applied separately .
f
When purchasing, please find out about the type of application
and the appropriate solder
28
| GB | IE
t
on a moist solder sponge
o
.
s .
PLS 48 D2