Vermeiren illico Installationsanleitung Seite 18

EN
NL
PL
CS
[9]
•
Slide the leg-section frame tubes over
the protruding inner tubes of the head
section.
[11]
•
Slide the two headboard tubes in the
open tube ends of the head section.
•
When the headboard is in place, it can
easily be locked by pressing both red
levers (24) up. If this is not possible, slide
the headboard backwards/forwards till
the lever falls in the locking hole.
•
Repeat this step for the footboard.
[10]
•
Slide the leg section further till the outer
frame tubes touch.
•
Turn star knob (23) in the hole of the tube
and tighten it. Repeat this on the other
side of the bed.
24
[12]
•
Place the lifting pole in one of the two
pole sockets at the head-end side.
Installation manual
- 14 -
Illico
2018-07
Assembly and disassembly
23