Assembly And Disassembly; Tools; Control Box Connections - Vermeiren illico Installationsanleitung

EN
NL
4

Assembly and disassembly

PL
•
The bed needs to be (dis)assembled by a specialist dealer according to the instructions
in this chapter.
CS
•
Prevent bystanders from accessing the (dis)assembling area.
•
Keep the (dis)assembling area clean and tidy, to prevent falling.
•
Collect all small parts in a box or bag.
•
While (dis)assembling and operating the bed, make sure no objects or body parts get
caught between parts. In particular, pay attention to the position of the cables.
4.1
To (dis)assemble the bed, no special tools are needed, except a tool to
open the control box, see picture. This control-box opener is part of the
delivery and is attached in a recess at the back of the control box.
4.2
Detail information on Linak control box CA40 can be found on website:
www.linak.com
Connect all cables according to following list, Figure 4 and Figure 5:
(a) Power-supply cable
(b) Motor of undercarriage
(c) Motor of head section
(d) Motor of leg section (optional)
(e) Handset
CAUTION Risk of injuries or damage

Tools

Control box connections

a
Power-supply cable connection
Control-box opener
> In external socket
> In socket no. 1
> In socket no. 2
> In socket no. 4
> In protruding socket
Installation manual
- 10 -
Illico
2018-07
Assembly and disassembly