MC2A
NOTE
This manual apply to MC2A measuring amplifier from Hardware
Version 1.10. The label on the printed circuit board is visible when
the housing cover is opened (see (7) in the following figure).
1
Controls
The controls are accessible after removing the lid of the housing.
Fig. 1.1: Control elements
Notes:
1 Switch "voltage output/current output" S 22 (optional)
2 Screw driver potentiometer "range" P 22
3 Screw driver potentiometer "zero balance" P 21
4 "Range" switch S 21
5 Screw driver potentiometer "Ref. phase P 25
6 Screw driver potentiometer "Limit value" P 23
A1974−2.4 en/de/fr
7
HBM