Replacing The Lamp - Electrolux EJF1801FW Benutzerinformation

6.4 When the appliance is not
used for long periods
1. Deactivate the appliance and discon-
nect the mains plug from the mains
socket.
2. Remove all the food.

6.5 Replacing the lamp

1
7. TROUBLESHOOTING
WARNING!
Disconnect the mains plug from
the mains socket before you do
the check.
For problems that are not in the
table, contact the Service.
Problem
The appliance makes noise
during operation.
The appliance does not
operate.
2
Possible solution
Some sounds are normal when the appliance is op-
erating. Refer to the leaflet supplied with the appli-
ance.
Make sure that the appliance is activated.
Make sure that the mains plug is connected to the
mains socket.
Do a check and see if there is voltage. Connect a
different appliance to the same mains socket. To re-
pair a mains socket, contact a qualified electrician.
3. Defrost the appliance.
4. Fully clean and dry the appliance and
all the accessories.
5. Keep the doors open to prevent un-
pleasant smells.
1.
Disconnect the appliance.
2. Push the movable part to unhook the
lamp cover (1).
3. Remove the lamp cover (2).
4. Replace the old lamp with a new one.
Use only lamps for household applian-
ces.
5. Install the lamp cover.
6.
Connect the mains plug to the main
socket.
7. Open the door. Make sure that the
lamp comes on.
The type of light bulb or halogen
lamp used for this appliance, is only
for household appliances. Do not
use it for house lightning.
ENGLISH 47