Care & Cleaning - Kenwood FPM260 series Bedienungsanleitung

centrifugal juicer
Use the centrifugal juicer for making juice from firm fruit and
vegetables.
pusher
centrifugal lid
pulp remover
filter drum
bowl
juicing spout
to use the centrifugal juicer
1 Place the juicer bowl with the spout
the on the bowl with the
clockwise º until it locks
2 Place the pulp remover
tabs locate with the slots in the bottom of the drum ¾
3 Fit the filter drum µ
.
4 Place the attachment lid
locks ¸. Your juicer will not operate if the bowl or lid
are not fitted correctly into the interlock
5 Place a suitable glass or jug under the juice outlet.
6 Cut the food to fit the feed tube.
7 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube. Process fully before adding
more.
After adding the last piece, let the juicer run for a further 30
●
seconds to extract all the juice from the filter drum.
safety
Do not use the juicer if the filter is damaged.
●
The cutting blades on the base of the filter drum are very sharp,
●
take care when handling and cleaning the drum.
Only use the pusher supplied. Never put your fingers in the feed
●
tube. Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
●
important
f the juicer starts to vibrate, switch off and empty the pulp from
I
●
the drum. (The juicer vibrates if the pulp becomes unevenly
distributed).
Maximum capacity that can be processed at one time is 800g of
●
fruit or vegetables.
Some very hard foods may make your juicer slow down or stop.
●
If this happens switch off and unblock the filter.
Switch off and clear the pulp collector regularly during use.
●
hints
Before processing remove stones and pips (eg pepper, melon,
●
plum) and tough skins (eg melon, pineapple). You don't need to
peel or core apples and pears.
Use firm, fresh fruit and vegetables.
●
Citrus fruit - peel and remove the white pith, otherwise the juice
●
may taste bitter. For best results use the citrus juicer.
(if supplied)
onto the power unit, align
on the power unit and turn
.
into the filter drum - ensuring the
.
onto the bowl and turn until it
.
care & cleaning
Always switch off and unplug before cleaning.
●
Handle the blades and cutting disc with care - they
●
are extremely sharp.
Some foods may discolour the plastic. This is perfectly normal
●
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area
●
is clear of food debris.
Don't immerse the power unit in water.
●
Store excess cord in the storage area at the back of the power
●
unit .
liquidiser/mill
1 Empty the goblet/jar before unscrewing it from the blade unit.
2 Wash the goblet/jar by hand.
3 Remove and wash the seals.
4 Don't touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared metal whisk
Detach the beaters from the drive head by gently pulling them
●
free. Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry.
●
Do not immerse the drive head in water.
all other parts
Wash by hand, then dry.
●
Alternatively they are dishwasher safe and can be washed on the
●
top rack of your dishwasher. Avoid placing items on the bottom
rack directly over the heating element. A short low temperature
(Maximum 50°C) programme is recommended.
item
main bowl, lid, pusher
knife blades, dough tool
detachable drive shaft
discs
whisk beaters
Do not immerse the drive head in water
citrus juicer
centrifugal juicer
liquidiser glass goblet, lid, filler cap
glass mill jar
blade unit and seal for liquidiser and mill
spatula
6
suitable for
dishwashing
✔
✔
✔
✔
✔
✔
✔
✔
✔
✘
✔