Care & Cleaning; Service & Customer Care; Citrus Press - Kenwood FP479 Bedienungsanleitung

to use the cutting discs
1 Fit the drive shaft and bowl onto the power unit.
k d
2 Holding by the centre grip , place the disc onto the
drive shaft with the appropriate side uppermost
3 Fit the lid.
4 Choose which size feed tube you want to use. The
pusher contains a smaller feed tube for processing
individual items or thin ingredients.
To use the small feed tube - first put the large
pusher inside the feed tube.
To use the large feed tube - use both pushers
together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
hints
G
Use fresh ingredients
G
Don't cut food too small. Fill the width of the large feed tube fairly full. This
prevents the food from slipping sideways during processing. Alternatively use
the small feed tube.
G
When using the chipper disc, place ingredients horizontally.
G
When slicing or shredding: food placed upright
k g
placed horizontally .
G
There will always be a small amount of waste on the plate or in the bowl after
processing.
k f

citrus press

Use the citrus press to squeeze the juice from
citrus fruits (eg oranges, lemons, limes and
grapefruits).
cone
sieve
to use the citrus press
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the sieve into the bowl - ensuring the sieve
handle is locked into position directly over the
k h
bowl handle .
3 Place the cone over the drive shaft turning until
k i
it drops all the way down .
4 Cut the fruit in half. Then switch on and press
the fruit onto the cone.
G
The citrus press will not operate if the
sieve is not locked correctly.
k d
k e
k e
.
k f
comes out shorter than food
k g
k i
k h
care & cleaning
G
Always switch off and unplug before cleaning.
G
Handle the blades and cutting discs with care - they are extremely sharp.
G
Some foods may discolour the plastic. This is perfectly normal and won't harm
the plastic or affect the flavour of your food. Rub with a cloth dipped in
vegetable oil to remove the discolouration.
power unit
G
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food
debris.
G
Store excess cord in the storage area at the back of the machine.
liquidiser
1 Empty the jug before unscrewing it from the blade unit.
2 Wash the jug by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot soapy water, then
rinse thoroughly under the tap. Don't immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
G
Detach the beaters from the drive head by gently pulling them free. Wash in
warm soapy water.
G
Wipe the drive head with a damp cloth, then dry. Do not immerse the
drive head in water.
all other parts
G
Wash by hand, then dry.
G
Alternatively they can be washed on the top rack of your dishwasher.
service & customer care
G
If the cord is damaged it must, for safety reasons, be replaced by Kenwood or
an authorised Kenwood repairer.
If you need help with:
G
Using your machine
G
Servicing or repairs
Contact the shop where you brought the food processor.
4